Private Residence Stucco Fence | Fort Myers, FL
Jason Lopez sought a sophisticated solution to increase privacy in his backyard while establishing a clean, architectural definition for his property line. The primary objective was to create a finished stucco fence that appeared as an integral part of the home’s original design, rather than a typical aftermarket addition.
Project Overview
Jason required a 6-foot decorative stucco privacy fence for his residence in Fort Myers, FL. He demanded a structure that looked solid and permanent but wanted to avoid the extended timelines and heavy site disruption inherent in traditional block-and-masonry construction.
This project scope encompassed approximately 110 linear feet of side and rear yard fencing. The design utilized the Decorative Architectural Shapes wall system, featuring:
High-density EPS core panels.
A durable, textured stucco-style finish.
Galvanized steel structural posts.
Isolated concrete footings.
Architectural wall and post caps.
The Challenge
Privacy Requirements: The side and rear property lines were exposed and required a complete visual block.
Aesthetic vs. Effort: The homeowner desired the strength of a permanent wall without the “construction zone” atmosphere of a long-term masonry project.
Site Layout: The project required precise, straight runs and a seamlessly integrated service gate.
Maintenance: A low-maintenance alternative to wood or vinyl was a priority.
Budget Control: Achieving a high-end, luxury look while remaining within a realistic residential budget.
Our solution
The Decorative Architectural Shapes concept provided the home with a pristine stucco wall aesthetic without the extreme weight or the month-long schedule of a block wall.
The system utilizes an EPS core protected by a high-performance textured finish. Galvanized steel posts provide structural integrity at key intervals, set into discrete concrete footings rather than a continuous, invasive strip footer. This approach was tailored to specific project engineering and local permit requirements.
System Details
Wall Core: EPS panels that provide the mass and visual density of a solid wall without the heavy structural load.
Support: Galvanized steel posts engineered for stability at each main support point.
Finish: A specialized protective coating with a refined, textured stucco-style surface.
Footings: Concrete post footings/sockets, sized specifically to approved project drawings.
Caps: Finished architectural wall caps and decorative post caps installed post-alignment.
Before / After
Before: An open property line with limited privacy and an unfinished visual boundary.
After: A transformed backyard featuring a clean, private, and architecturally complete perimeter. The fence enhances the home’s curb appeal and provides a professional separation from neighboring properties.
Installation Process
Layout: Marking the fence perimeter and gate location.
Preparation: Excavating post locations and footing areas.
Setup: Setting EPS foam fillers to define installation points.
Structural Assembly: Placing columns over the concrete footer and sliding the galvanized posts through the column tops.
Infill: Pouring concrete into the columns to secure the post and steel pipe reinforcement.
Panel Integration: Installing the EPS wall panels.
Alignment: Bracing and leveling the wall while footings cure.
Finishing: Applying wall caps, post caps, and final finish details.
Completion: Site cleanup and final quality review.
The result
Weight Reduction: 76% lighter than a comparable block-and-stucco wall.
Installation Speed: 58% faster field installation than typical masonry work.
Cost Efficiency: 32% lower installation cost based on draft project assumptions.
Durability: The textured finish offers a clean look with significantly less repainting or repair than wood alternatives.
Timeline: Estimated total installation time: 13 days.
Compliance & Engineering Notes
Note: This is a draft project case study for marketing purposes.
Final wind design, footing sizes, exposure categories, and permit drawings are based on actual project location and professional engineering review.
All engineering claims are project-specific.
Client Feedback
“We wanted a fence that looked like it belonged with the home, not something added later. The Decorative Architectural Shapes concept gave us the privacy and finished look we wanted, with a cleaner schedule than the masonry options we looked at.”
— Jason Lopez, Private Residence
Similar projects we have worked on
HOA / Gated Community | Orlando, FL
See the resultsPrivate Residence Stucco Fence | Fort Myers, FL
See the results
6 Foot High Decorative Stucco Wall Fence for an Estate Residence
See the results
Architectural Stucco Privacy Wall for a New Construction Home | Tampa, FL
See the results
Private Residence Stucco Fence
See the results
6 Foot High Decorative Stucco Wall Fence for a Corner-Lot Home
See the results
Private Residence Privacy Wall | Sarasota, FL
See the results
HOA / Residential Development Privacy Wall | Jacksonville, FL
See the results
Luxury Residence Privacy Wall | Naples, FL
See the results
Private Residence Privacy Wall | Ponte Vedra Beach, FL
See the resultsFAQ
Is this a real stucco look?
Yes. The system is specifically engineered to replicate the appearance and feel of a finished stucco wall.
Is it lighter than block?
Absolutely. The EPS core technology ensures the system is significantly lighter than traditional masonry, reducing site impact.
Does it still need engineering?
Yes. Every project is reviewed for wind load, footing requirements, and local building codes.
Can it include a gate?
Yes. Integrated pedestrian and service gates are easily incorporated into the layout.
Can the color and finish be changed?
Yes. The finish can be customized to match or complement the existing home’s aesthetic.
Blog posts
Exterior Window Shutters – Styles, Materials, Custom Options, and Installation Guide
Foam molding installation is exactly what fills that gap. It’s lighter than wood, far cheaper than plaster, and you can do the whole job yourself in a weekend without a crew or specialized training. This guide walks you through every stage – from choosing your tools to avoiding the mistakes that send people back to the hardware store twice.
How to Install Foam Molding – Step-by-Step Guide, Tools, Adhesives, and Common Mistakes
Foam molding installation is exactly what fills that gap. It’s lighter than wood, far cheaper than plaster, and you can do the whole job yourself in a weekend without a crew or specialized training. This guide walks you through every stage – from choosing your tools to avoiding the mistakes that send people back to the hardware store twice.
& specification catalog
Get the definitive guide to our custom decorative architectural foam shapes. This free catalog is packed with hundreds of design profiles, detailed technical specifications, and real-world project applications.
Have a project in mind?
Our dedicated specialists are ready to collaborate with you, turning your concept into a detailed plan with a transparent budget. Let’s bring your vision to life!